TP-Link wireless repeaters are known for their next-gen technology and amazing WiFi performance. However, many users face issues with their TP-Link repeaters. And one such issue is, TP-Link repeater keeps dropping connection. Are you are experiencing the same issue with your wireless device? If the answer is a big yes, consider following the troubleshooting hacks mentioned in this post and learn how to get rid of the issue in a matter of minutes.
Fixed: TP-Link Repeater Keeps Dropping Connection
- Reboot Your TP-Link Repeater
Rebooting the device is one of the most effective ways to get rid of technical issues. You should give it a try too. Follow the below-mentioned instructions and learn how to reboot your TP-Link wireless repeater:
- Disconnect your client devices connected to the network of your repeater.
- Power off your repeater and unplug it from its wall socket.
- Wait for a couple of seconds.
- Thereafter, plug your repeater back into the wall socket and turn it on.
- Reconnect your client devices to the network of your TP-Link repeater.
Now, check whether you are able to access the tplinkrepeater login page. No? Well, that is because the TP-Link repeater keeps dropping connection issue is still stuck to your hip.
- Verify the Ethernet Connection
Chances are that the Ethernet cable connecting your TP-Link wireless repeater and the existing router is worn out or damaged. If it turns out to be true, consider replacing your Ethernet cable with a new one.
Lost faith in a wired connection? Well, in that case, consider connecting your devices with the help of a wireless source.
- Bring Your Devices Closer
Apart from ensuring a strong connection between your TP-Link wireless repeater and your home router, you also need to pay attention to the distance between them.
Make sure that the distance between your devices is not too much. Your extender should be placed in the same room as the router.
- Update Firmware
Another thing that you can do to troubleshoot the TP-Link repeater keeps dropping connection issue is to update the firmware of your device. Here is how you can update the firmware of your device to the latest version:
- Switch on your computer.
- Open your most preferred internet browser.
- In the address field, type the default web address of your TP-Link repeater.
- Press the Enter key.
- You will be taken to the official login page of your TP-Link repeater.
- Input the default admin password and username.
- Click the Log In button.
- On the TP Link WiFi extender setup wizard, go to the Settings menu.
- Click System Tools.
- Select Firmware Upgrade.
You can also update the firmware of your TP-Link wireless repeater via the app.
- Avoid WiFi Interference
Make sure that your TP-Link repeater as well as your home router is kept away from the following things:
- Cordless phones
- Washing machines
- Baby monitors
- Bluetooth speakers
- Mirrors
- Fish tanks
- Treadmills
- Televisions
- Refrigerators
- Microwave ovens
- Corners
- Concrete walls
- Aluminum studs
Also, do not place your devices near utensils containing a large amount of water.
- Reset Your TP-Link Repeater
Did none of the aforementioned tips help you resolve the TP-Link repeater keeps dropping connection issue? Well, in that case, perform factory default reset.
Here is how you can reset your TP-Link wireless repeater:
- Find the Reset button located on your device.
- Take an oil pin and press the Reset button using it.
- Wait for some time.
Once done, perform TP Link setup from scratch using any method you prefer.
Summing Up
With that, our guide to fix the TP-Link repeater keeps dropping connection issue has come to an end here. Hopefully, the tips mentioned above will help you get rid of the issue you were facing with your device.
